Whites PRIZM IV Manual de usuario descargar pdf (Pagina 17)

⇠

Prizm™

II • III • IV * V

3. VCO (Voltage Controlled Oscillator) Pinpointing. VCO pro-

duces a progressively higher pitched tone as the target signal

becomes progressively stronger during pinpointing.

Press Pinpoint to activate the pinpoint mode. Then press

TONE ID to enable or disable VCO pinpointing.

VCO is a feature that only operates in the Pinpoint mode.

When ON, the stronger the target response, the higher the

pitch of the sound.

VCO is an excellent aid to pinpointing. Slowly “X” the loop over

the suspected target area. The highest pitch sound indicates

the center of the target.

At the point of the highest pitch sound, the target depth fea

ture indicates its most accurate depth.

Prizm™ V

2. Press and hold Multi Tone a few seconds (instead of tap-

ping) to enable three tone Tone ID (like Prizm IV). An operator

may wish to limit the tone range to three tones, good targets

at the higher tone, questionable foil range targets at the me-

dium tone, and iron at the lowest tone.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 31 32

Sin comentarios

Whites PRIZM IV Manual de usuario Pagina 17